Rock Paper Scissors Teams

Massively multi-player rock paper scissors!


Playing rock paper scissors is usually a two player game… but it will work with many more players too! When playing with more than two players, it becomes a team game: all players shake at the same time, then the amount of rocks, paper, and scissors is tallied between all the players. Teams are formed automatically based on which tool is chosen by shaking the micro:bit. The team with the most players after the shake wins the game.

Starting with the basic version of the RPS game, we are going to change the code so that the micro:bit counts and displays the number of players on a team. The micro:bit will use radio communication to send its status and receive the status of the other boards.

Let’s get started!

Starting blocks

Let’s start out with the code from the original game. The basic version picks one of the tools in an ||input:on shake|| event and displays a matching icon. Take a peek at the code below to refresh your memory.

let tool = 0
input.onGesture(Gesture.Shake, function() {
    tool = Math.randomRange(0, 2)
    if (tool == 0) {
        basic.showIcon(IconNames.SmallSquare)
    } else if (tool == 1) {
        basic.showIcon(IconNames.Square)
    } else {
        basic.showIcon(IconNames.Scissors)
    }
});

Step 1: Refactoring the rendering

Refactoring is a funny word used in coding which pretty much means reorganizing. In this case, we are going to move the code that displays the rock/paper/scissor icon into its own ||basic:forever|| loop.

let tool = 0
input.onGesture(Gesture.Shake, function() {
    tool = Math.randomRange(0, 2)
})

basic.forever(function() {
    if (tool == 0) {
        basic.showIcon(IconNames.SmallSquare)
    } else if (tool == 1) {
        basic.showIcon(IconNames.Square)
    } else {
        basic.showIcon(IconNames.Scissors)
    }
});

Step 2: Send status via radio

We send the value of tool over the radio to the other micro:bit in the ||basic:forever|| loop. Since a radio packet may or may not arrive, it’s a good idea to keep sending them.

We also set the radio group and send the device serial number (a number that uniquely identifies a micro:bit) as we will need that later.

let tool = 0
input.onGesture(Gesture.Shake, function() {
    tool = Math.randomRange(0, 2)
})

basic.forever(function() {
    radio.sendNumber(tool)
    if (tool == 0) {
        basic.showIcon(IconNames.SmallSquare)
    } else if (tool == 1) {
        basic.showIcon(IconNames.Square)
    } else {
        basic.showIcon(IconNames.Scissors)
    }
});
radio.setGroup(10)
radio.setTransmitSerialNumber(true)

Step 3: the team roster

All players are constantly broadcasting to the other players which tool they picked. Let’s add the code that receives this status and counts it.

We’ll add an Array variable that contains all the players on the same team as the current player. This array, named players, is like your team roster: it contains the list of micro:bit serial numbers that are using the same tool as you.

let players: number[] = [0]

Step 4: Receiving a message (part 1)

In an ||radio:on radio received|| event, we receive the status from another micro:bit. We use the receivedNumber value which comes directly from this block. This tells us which tool was chosen. There’s other information available from the packet received when the ||radio:on radio received|| event happens. From the packet, we also want to use the serial number of the micro:bit that sent the tool message.

We compute three values from the data received:

  • match - a boolean value indicating whether or not the tool of the other micro:bit matches our current tool
  • player_index - the position in the array of the other board’s serial number. It will be -1 if it is not in the array
  • found - a boolean value indicating whether or not the micro:bit serial number is part of the players array
let match = false
let player_index = 0
let players: number[] = [0]
let tool = 0
let found = false
let serialNumber = 0;
radio.onReceivedNumber(function (receivedNumber) {
    serialNumber = radio.receivedPacket(RadioPacketProperty.SerialNumber)
    match = tool == receivedNumber
    player_index = players.indexOf(serialNumber)
    found = player_index >= 0
})

Step 5: Receiving a message (part 2)

There are two cases that we need to handle when looking at match and found:

  • if we have a match and the player is not found in the list, then we add it to players
  • if we don’t have a match and the player is found in the list, then we remove it from players

We turn the two rules above into two ||logic:if then|| statements where the serial number is added or removed.

let match = false
let player_index = 0
let players: number[] = [0]
let tool = 0
let found = false
let temp = 0
let serialNumber = 0;
radio.onReceivedNumber(function (receivedNumber) {
    serialNumber = radio.receivedPacket(RadioPacketProperty.SerialNumber)
    match = tool == receivedNumber
    player_index = players.indexOf(serialNumber)
    found = player_index >= 0
    if (match && !(found)) {
        players.push(serialNumber)
    } 
    if (!(match) && found) {
        temp = players.removeAt(player_index)
    }
})

Step 6: Resetting the team

What if some of the other players leave the game? They would stop broadcasting their status but would still stay in our list of players. To avoid this problem, we reset the players array each time we shake:

input.onGesture(Gesture.Shake, function() {
    let players: number[] = [0]
    let tool = Math.randomRange(0, 2)
})

Step 7: Showing team score

The team score is the number of players in that team… which is really just the length of the players array. We add a ||basic:show number|| block in the ||basic:forever|| loop to display it.

let players: number[] = [0]
let tool = 0
basic.forever(function() {
    basic.showNumber(players.length)
})

The final code

Now, it’s time to glue together all the pieces of our program. Go carefully through all the steps and assemble the various features. Eventually, it should look like the following program here. Download and play it with your friendssss!

let temp = 0
let found = false
let player_index = 0
let tool = 0
let match = false
let players: number[] = []
let serialNumber = 0;
radio.onReceivedNumber(function (receivedNumber) {
    serialNumber = radio.receivedPacket(RadioPacketProperty.SerialNumber)
    match = tool == receivedNumber
    player_index = players.indexOf(serialNumber)
    found = player_index >= 0
    if (match && !(found)) {
        players.push(serialNumber)
    }
    if (!(match) && found) {
        temp = players.removeAt(player_index)
    }
})
input.onGesture(Gesture.Shake, function() {
    players = [0]
    tool = Math.randomRange(0, 2)
})
basic.forever(function() {
    radio.sendNumber(tool)
    if (tool == 0) {
        basic.showIcon(IconNames.SmallSquare)
    } else if (tool == 1) {
        basic.showIcon(IconNames.Square)
    } else {
        basic.showIcon(IconNames.Scissors)
    }
    basic.showNumber(players.length)
})
players = [0]
radio.setGroup(10)
radio.setTransmitSerialNumber(true)
radio