rerokit/pxt-reromicro 0.1.2 GitHub

rero:micro Extension for Microsoft MakeCode

This MakeCode package/extension/library provides driver for rero:micro educational robot.
Read this document at makecode.microbit.org or github.com.

Let’s make some noise!

• rero:micro’s built-in piezo buzzer works with the default ||Music|| blocks that come with MakeCode.

// Play melody once at program start-up
music.beginMelody(music.builtInMelody(Melodies.PowerUp), MelodyOptions.Once)

Let’s move it, move it~

• Use ||move forward at (speed)||, ||move backward at (speed)||, ||turn left at (speed)|| and ||turn right at (speed)|| to navigate rero:micro. The value for speed is between 0 and 100.

• Use ||brake|| to brake rero:micro.

• Use ||run (motor) at (speed)|| to control the each motor individually. Negative speed (-100 to -1) reverses the robot (eg: -50), positive speed (1 to 100) moves it forward (eg: 80) and zero speed (0) brakes the motor. Note that the direction refers to rero:micro’s movement, NOT motor’s rotating direction.

// rero:micro move forward at speed 50, for 1 second
reromicro.MoveForward(50)
basic.pause(1000)

// rero:micro turn left at speed 30, for 500 miliseconds
reromicro.TurnLeft(30)
basic.pause(500)

// rero:micro brakes
reromicro.Brake()

Sensing obstacle

• ||ultrasonic distance(cm)|| returns the distance in centimeter between ultrasonic sensor and any obstacle in front of it.

// Forever loop
basic.forever(function () {

    // Brake rero:micro when obstacle is detected at 15cm away or nearer.
    // Otherwise, keep moving forward at speed 50.
    if (reromicro.ReadUltrasonic() < 15) {
        reromicro.Brake()

    } else {
        reromicro.MoveForward(50)
    }
})

Line tracking

• Use ||(x) sensor detects line|| to get the boolean value of line detection. Returns true when line is detected, otherwise false.

• Use ||(x) line sensor IR intensity|| to get the reflected infrared (IR) intensity value, ranging from 0 to 1000.

// Forever loop
basic.forever(function () {

    // read all three line sensors first
    reromicro.ReadLineSensors()

    // Move forward if only center sensor detects line.
    // Turn right if only right sensor detects line.
    // Turn left if only left sensor detects line.
    // Note: This simple program ignores all other possible conditions.
    if (reromicro.LineSensorDetectsLine(LineSensors.Center)) {
        reromicro.MoveForward(50)

    } else if (reromicro.LineSensorDetectsLine(LineSensors.Right)) {
        reromicro.TurnRight(40)

    } else if (reromicro.LineSensorDetectsLine(LineSensors.Left)) {
        reromicro.TurnLeft(40)
    }
})

Colour Splash!

• This robot also has 7x NeoPixels (WS2812B programmable RGB LEDs) built-in.

// Create a NeoPixel strip at pin P1 with 7 LEDs and either standard RGB format.
let strip: neopixel.Strip = null
strip = neopixel.create(DigitalPin.P1, 7, NeoPixelMode.RGB)

// Reduce the brightness to 50.
strip.setBrightness(50)

// Show red colour for 1 sec.
strip.showColor(neopixel.colors(NeoPixelColors.Red))
basic.pause(1000)

// Show blue colour for 1 sec.
strip.showColor(neopixel.colors(NeoPixelColors.Blue))
basic.pause(1000)

// Show rainbow colours.
strip.showRainbow(1, 310)

License

MIT

Supported targets

• for PXT/microbit

reromicro=github:ReRoKit/pxt-reromicro

reromicro=github:rerokit/pxt-reromicro#v0.1.2