Freenove/Makecode-Extension-Starter-Kit 1.0.2 GitHub

Makecode-Extension-Starter-Kit

Freenove Starter Kit Extension for makecode, mainly related to thermistors, 74HC595, digital tubes.

Starter Kit For Microbit

• You can buy the Freenove Starter Kit for Micro:bit from here.
  
  • http://www.freenove.com/store.html
• You can find all the information about it here.
  
  • https://github.com/Freenove/Makecode-Extension-Starter-Kit

Usage

Function	Description
Freenove.Initialization(DS,ST_CP,SH_CP)	Set the DS pin, ST_CP pin and SH_CP pin of 74HC595
Freenove.Write_Data(Data,Order)	The data of 0-255 is serially written to 74HC595, and then output in parallel through Q0-Q7. The order of data writing is MSBFIRST or LSBFIRST.
Freenove.Show_Number(Number)	74HC595 Control Digital Tube Display Number and Letter 0-F
Freenove.Shift_Operators(Data,Shift Operator,Figure)	Move data to the left (x) bit or to the right (x) bit

Examples:

The file test.ts, which uses most of the blocks in this extension.

Freenove.Initialization(DigitalPin.P0, DigitalPin.P1, DigitalPin.P2)
basic.forever(function () {
    basic.showNumber(Freenove.Thermistor(AnalogPin.P3))
    for (let index = 0; index <= 7; index++) {
        Freenove.Write_Data(Freenove.Shift_Operators(1, shift_operator.left, index), Order.MSBFIRST)
        basic.pause(500)
    }
    for (let index = 0; index <= 7; index++) {
        Freenove.Write_Data(Freenove.Shift_Operators(128, shift_operator.right, index), Order.MSBFIRST)
        basic.pause(500)
    }
    for (let index = 0; index <= 15; index++) {
        Freenove.Show_Number(index)
        basic.pause(500)
    }
})

In this example, micro: bit displays the temperature of the current environment, realizes flowing water light on a digital tube, and displays numbers and letters 0-F.

License

MIT

Supported targets

• for PXT/microbit

Freenove=github:Freenove/Makecode-Extension-Starter-Kit#v1.0.2